What are the intended applications for the TrijiDot Fiber Optic Shotgun Sight?
The sight was designed with a moderate bead size that should be ideal for a wide range of hunting applications, including upland game (pheasant, quail, grouse, dove), waterfowl, and turkey hunting. However, the sight would also serve well in other roles where replacing a standard bead sight with a bright, rugged glowing bead would be beneficial, including some tactical and home defense roles.
Which model fits my shotgun?
Measure the width of your barrel rib, and choose the appropriate model as listed below:
SH01-G & SH01-R
SH02-G & SH02-R
SH03-G & SH03-R
fits .210" to
fits .265" to
fits .325" to
Super Black Eagle 2
(with barrel rib)
(with barrel rib)
Do I need any tools to install the TrijiDot Fiber Optic Shotgun Sight?
A standard size .050” hex key (allen wrench) is the only tool required which is included with the sight.
Do I need to remove my existing bead sight to install the TrijiDot Fiber Optic Shotgun Sight?
No! The sight fits over most existing bead sights. On applications where the sight does not slide over the existing bead, simply butting the end of the Fiber Optic Shotgun Sight against the existing bead sight will still result in secure attachment.
Do I need to be concerned about recoil from 3 ½” magnums, slugs, 10-Ga, etc?
No! The sight has been tested through many thousands of rounds of recoil at a level well in excess of any shotgun recoil force of which Trijicon is aware.
Is a fiber optic and tritium version available?
Not at this time.
Is my TrijiDot supposed to have magnets on the bottom?
When we launched the TrijiDot, it did include magnets. Based on customer feedback and further engineering tests, it was determined that the magnets were redundant and not serving any real purpose, so the TrijiDot no longer includes magnets. The set screws will hold the TrijiDot in place.